Orio Box

Indoors box camera with a range of lenses

Orio is Intellio's entry level, reasonably priced model family with a resolution of 1.3 (1280 × 960) megapixels. Thanks to Intellio’s Video Codec image transfer, the camera will only forward signals if an event is detected – this will economize on system requirements. Orio cameras are equipped with the most important on-board detectors and intelligence.

This is an end-of-life camera model, not produced anymore. Find our newer ’box’ CCTV camera types below.

Mainly designed for indoor use, this box type model is available with a range of lenses. The camera’s highly sensitive, physical day/night switch, built-in bandwidth selection and integrated intelligence help versatile use.


  • Physical day/night switch
  • 0.45/0.01 lux sensitivity
  • 1280 × 960 definition
  • MJPEG / IVC / H264
  • 12 VDC, PoE
  • Sensor: Aptina 1/3” CMOS, 1.3MP
Image Sensor Aptina 1.3 MP, WDR, 1/3” CMOS Progressive Scan
Sensitivity Day/Night: 0.45 lux / 0.01 lux
Shutter time 1/6 s – 1/20,000 s
Day/night mode TRUE
Lenses (optional) 1/3” format, C/CS mount, DC iris, megapixel resolution
Resolution 1280 × 960; 640 × 480
Frame Rate 20  fps (IVC 1280 × 960), 25  fps (IVC 640 × 480), 12  fps (MJPEG 1280 × 960), 18  fps (MJPEG 640 × 480), 8  fps (H.264 1280 × 960), 14  fps (H.264 640 × 480)
Image Settings Brightness, Exposure Control, Gain Control, Anti-flickering (50Hz/60Hz), Saturation, Contrast, Gamma, Day/Night mode (Auto/Day/Night), Preferred Day/Night Mode, Sharpness, Noise Filtering, Image Mirroring
Encoder Settings Codec Type, Quality, I-frame Distance, Block Sensitivity, Resolution, Frame Limit, Reduced Frame Rate Control, Bandwidth Limit, Pre- and Post-alarm
Video Compression Intellio Video Codec (IVC), H.264, Motion JPEG
Bitrate 32 Kbps – 12 Mbps
Streaming Intellio Video Streaming, Dual streaming over RTSP
Ethernet 10BaseT/100BaseTX, RJ-45
IO Ports 6 Pin IO Connector (1 Output (2 Pins), 1 Input (2 Pins), GND, AUX Voltage
Reset Button Reset To Factory Defaults (IP Address Reset)
Protocols NTP, TCP/IPv4, DHCP, DNS
Security Camera User Name and Password
Operating Conditions 0 °C – 50 °C
Power Connector Screw Fixable Terminal Blocks | Accessory: Power connector (DC jack 5.5 mm / 2.1 mm)
Power Supply 12 V DC (+2 V, -3 V), 400 mA / PoE Support (IEEE 802.3af – PoE Class 1)
Power Consumption Max. 4 W
Weight 380 g (without lens)
Certificates CE: EN 55022, EN 55024, RoHS compliant
Camera software
Motion Detection 64 polygon per mask, 8 masks, All masks with adjustable sensitivity and motion percent parameters, Separated motion detector for monitoring and for recording
Intelligent video
Detectors Motion Detector, Tampering detectors: Covering detection, Rotation detection, IO port input detector
Extended Intelligence Tracker based detectors: Intelligent motion detection, Tripwire detection, Entry detection, Direction detection, Object based detector: Object removal / theft detection
Object Tracker 64 polygon for masking, Object behavior settings, Day-time/Night-time sensitivity, Environmental settings


Product description (pdf)
Step by step installation guide
User’s manual for the camera web interface
The latest firmware for Orio cameras
Please let us know your last name.

Please let us know first your name.

Please let us know your email address.

Invalid Input

Please enter your company name!

Please select your country / region


Please let us know your message.

Invalid Input

Invalid Input