Orio Box

Indoors box camera with a range of lenses

Orio is Intellio's entry level, reasonably priced model family with a resolution of 1.3 (1280 × 960) megapixels. Thanks to Intellio’s Video Codec image transfer, the camera will only forward signals if an event is detected – this will economize on system requirements. Orio cameras are equipped with the most important on-board detectors and intelligence.

Mainly designed for indoor use, this box type model is available with a range of lenses. The camera’s highly sensitive, physical day/night switch, built-in bandwidth selection and integrated intelligence help versatile use.

 

  • Physical day/night switch
  • 0.45/0.01 lux sensitivity
  • 1280 × 960 definition
  • MJPEG / IVC / H264
  • 12 VDC, PoE
  • Sensor: Aptina 1/3” CMOS, 1.3MP
Camera
Image Sensor Aptina 1.3 MP, WDR, 1/3” CMOS Progressive Scan
Sensitivity Day/Night: 0.45 lux / 0.01 lux
Shutter time 1/6 s – 1/20,000 s
Day/night mode TRUE
Lenses (optional) 1/3” format, C/CS mount, DC iris, megapixel resolution
Image
Resolution 1280 × 960; 640 × 480
Frame Rate 20  fps (IVC 1280 × 960), 25  fps (IVC 640 × 480), 12  fps (MJPEG 1280 × 960), 18  fps (MJPEG 640 × 480), 8  fps (H.264 1280 × 960), 14  fps (H.264 640 × 480)
Image Settings Brightness, Exposure Control, Gain Control, Anti-flickering (50Hz/60Hz), Saturation, Contrast, Gamma, Day/Night mode (Auto/Day/Night), Preferred Day/Night Mode, Sharpness, Noise Filtering, Image Mirroring
Encoder Settings Codec Type, Quality, I-frame Distance, Block Sensitivity, Resolution, Frame Limit, Reduced Frame Rate Control, Bandwidth Limit, Pre- and Post-alarm
Compression
Video Compression Intellio Video Codec (IVC), H.264, Motion JPEG
Bitrate 32 Kbps – 12 Mbps
Streaming Intellio Video Streaming, Dual streaming over RTSP
Interface
Ethernet 10BaseT/100BaseTX, RJ-45
IO Ports 6 Pin IO Connector (1 Output (2 Pins), 1 Input (2 Pins), GND, AUX Voltage
Reset Button Reset To Factory Defaults (IP Address Reset)
Network
Protocols NTP, TCP/IPv4, DHCP, DNS
Security Camera User Name and Password
General
Operating Conditions 0 °C – 50 °C
Power Connector Screw Fixable Terminal Blocks | Accessory: Power connector (DC jack 5.5 mm / 2.1 mm)
Power Supply 12 V DC (+2 V, -3 V), 400 mA / PoE Support (IEEE 802.3af – PoE Class 1)
Power Consumption Max. 4 W
Weight 380 g (without lens)
Certificates CE: EN 55022, EN 55024, RoHS compliant
Camera software
Motion Detection 64 polygon per mask, 8 masks, All masks with adjustable sensitivity and motion percent parameters, Separated motion detector for monitoring and for recording
Intelligent video
Detectors Motion Detector, Tampering detectors: Covering detection, Rotation detection, IO port input detector
Extended Intelligence Tracker based detectors: Intelligent motion detection, Tripwire detection, Entry detection, Direction detection, Object based detector: Object removal / theft detection
Object Tracker 64 polygon for masking, Object behavior settings, Day-time/Night-time sensitivity, Environmental settings

LINKS & DOWNLOADS

Product description (pdf)
Step by step installation guide
User’s manual for the camera web interface
The latest firmware for Orio cameras
 

Orio Box

Name(*)
Please let us know your name.

Email(*)
Please let us know your email address.

Phone
Invalid Input

Skype
Invalid Input

Subject(*)
Please write a subject for your message.

Message(*)
Please let us know your message.

Contact me by
Invalid Input

*Required information